Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Trunk

I have 2 switches 1&2 on switch 1 i have trunk port with encapsulation 802.1q and native vlan 5 ,this switch is connect to switch 2 to port that is in

access mode and on vlan 10.

i have user on switch 1 in vlan 10 and there are also user on switch 2 on vlan 2 .

My question

1.Will the link come up (no DTP is running)

2.If the link come up with the vlan 10 user able to communicate with vlan 10 user on other switch

Thanks in advance guys...

4 REPLIES

Re: Trunk

Have a look at the attached scenarios which are from the BCMSN book

It will clarify all your doubts

HTH, rate if it does

Narayan

Re: Trunk

Sorry missed the attachment in my earlier post

Narayan

Silver

Re: Trunk

Native VLAN 5 and ACCESS 10 will not establish trunk, and VLAN's 5 and 10 will be interconnected. I.E. Users from VLAN 5 on one switch will communicate with users in VLAN 10 in the other switch.

NATIVE vlan 5 and ACCESS vlan 10 means that frames for those VLANs are sent untagged, therefore as normal ethernet traffic in a broadcast domain.

New Member

Re: Trunk

well as far as i know the link will come up ,do you have any document to help me out here.

139
Views
0
Helpful
4
Replies
CreatePlease to create content