I have 2 devices on the each end of a Point to Point. One side has a Nexus 5000 the other end a Catalyst 4500. We want a trunk port on both sides to allow a single VLAN for the moment. I have not worked with Nexus before. Could someone look at the configurations of the Ports and let me know if it looks ok?
Thanks guys, we found the issue. The Catalyst is on my side and the Nexus is on the side of the hosting center. The hosting center moved his connection to a different Nexus 5000 and the connection came right up. We dropped the spanning-tree guard root.
It was working on the previous nexus when we set the native vlan for 141. So we thought it was the point to point dropping the tags.
The hosting center engineer this it might have to do with the VPC Peer-Link loop prevention on the previous Nexus.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.