Dear All
I have topo as below
R1(gi0/1)<------------->(gi1/0/1)SWH01(gi1/0/2)<---------SDH Network--------------->(gi1/0/1)SWH02
Configuration
-------R1
interface GigabitEthernet0/1.121
encapsulation dot1Q 121
ip address 192.168.1.1 255.255.255.252
-------SWH01
interface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/0/2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 121
switchport mode trunk
------SWH02
interface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 121
switchport mode trunk
interface Vlan121
ip address 192.168.1.2 255.255.255.252
I can not ping IP 192.168.1.1 from SWH02. I observed there sth wrong when trunking over SDH. Because when I config int vlan 121 on another switch(SWH04) already trunking with SWH01, I can ping IP 192.168.1.1 from SWH04.
Please kind advise this issue
Thanks and Best Regards.