Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

trying to sync remote firewall with NTP server...

The main HQ is behind an ASA 5510. The remote site is behind an ASA 5505. The tunnel is established and traffic from behind either firewall is working fine. Both sides can access all the devices behind the other firewall. The problem is that I can't access anything on the HQ side from within the remote 5505. I can't ping the 5510 or any router, switch, PC on the inside of the 5510. The main goal is to get the 5505 to associate with a NTP server on the HQ side. During troubleshooting, I have found that I can't access anything on the remote side from within the 5510 either. Any help would be appreciated.

2 REPLIES
New Member

The solution was to force the

The solution was to force the ping over the inside interface. I got it working now.

Hall of Fame Super Silver

I am glad that you figured it

I am glad that you figured it out and that it is now working. Thank you for posting back to the forum and letting us know what you found and how you fixed the problem.

 

HTH

 

Rick

31
Views
0
Helpful
2
Replies