Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Two cisco switches 3560 connection

Hi all,

I want to connect a far cisco switch 3560 to main switch 3560, distance bettween them is about 3 km and they are connected by a fiber link.

My question is: if the required GBIC/SFP Modules is GLC-SX-MM or GLC-LH-SM from the both ends.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Two cisco switches 3560 connection

You will need GLC-LH-SM=, and make sure the home run and patch cords are a single mode fibers. Multimode fiber cannot handle 3KM.

http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#model2

Regards,

jerry

2 REPLIES
Cisco Employee

Re: Two cisco switches 3560 connection

You will need GLC-LH-SM=, and make sure the home run and patch cords are a single mode fibers. Multimode fiber cannot handle 3KM.

http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#model2

Regards,

jerry

New Member

Re: Two cisco switches 3560 connection

thx a lot

261
Views
0
Helpful
2
Replies