Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Two fiber switches with layer 2 errors

I have 2 switches that are using fiber, but we see on 8 different servers layer 2 errors. I don't think that both switches have the same problem, either different servers showing the problem. All the cables with problem should not be the case. Does someone has any idea what could cause these errors?

1 REPLY
Hall of Fame Super Silver

Re: Two fiber switches with layer 2 errors

Hello Luiz,

what kind of errors are seen on the servers ?

They can complain of some Cisco proprietary protocol like CDP or of Cisco proprietary PVST STP BPDUs (these are sent over 802.1Q trunks) or for example DTP.

So this could be not a real issue.

see the following excellent document about different Cisco and IEEE frames

http://www.cisco.com/en/US/products/hw/switches/ps700/products_white_paper09186a00801b49a4.shtml

Hope to help

Giuseppe

118
Views
0
Helpful
1
Replies
CreatePlease login to create content