Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UDP packet flow over 2950 switch ports

I have a question that concerns UDP packet flow over a 12 port switch. When a UDP packet is sent to a IP destination will the UDP packet flow over every port on a switch? When I sniff each port these packets are flowing over ever port. Is this normal?

Hall of Fame Super Blue

Re: UDP packet flow over 2950 switch ports

Hi Tim

If the destination IP address is unknown to the switch then the switch will flood the packet out of all ports except the one it was received on. Once the switch has learned the mac-address to IP mapping then if the destination IP address is a unicast IP address then no you should not see it on all ports. There is nothing special about UDP compared to TCP in this regard.

Is the IP destination address definitely a unicast address ie. if it begins with 224.x.x.x and you do not have multicast enabled then the switch has to flood these packets to all ports as it would with a broadcast.

Hope this explains things, let me know the IP address if there is still some confusion


New Member

Re: UDP packet flow over 2950 switch ports

I have a 6509 switch between two networks. On one network the source is and the destination is the network ip range on the switch i see all ports with this udp packet flow is and the network destination side is on the side i have 5 or 6 switches connected via fiber. all switches i see this traffic on all ports.