Unable to configure VPN on 2911 router

[zaoclaude]

Dear all,

I have a Cisco 2911 router that I will like to use it for setting up a site to site VPN but the router does not support VPN commands. When I issue crypto isakmp command, it says command no recognized. When I issue ipsec transform-set command, it says command not recognized. The IOS running on my router is c2900-universalk9-mz.SPA.151-2.T1.bin. Also see the output of my show licences features command:

#show license feature

Feature name             Enforcement  Evaluation  Subscription   Enabled

ipbasek9                 no           no          no             yes

securityk9               yes          yes         no             no

uck9                     yes          yes         no             no

datak9                   yes          yes         no             no

gatekeeper               yes          yes         no             no

SSL_VPN                  yes          yes         no             no

ios-ips-update           yes          no          yes            no

SNASw                    yes          yes         no             no

hseck9                   yes          no          no             no

WAAS_Express             yes          no          no             no

Please I need an advice on what can be done on this router to enable use it for setting up a VPN connection.

Regards

Claude Fozao

[Richard Burts]

Claude

I believe that you need to enable the securityk9 license on this router for it to support VPN.

HTH

Rick

[sachin.kr]

Sir

Where i can download the securityk9 license.

Sachin Kumar

[Richard Burts]

You purchase the license upgrade, either directly from Cisco or from your reseller, and then you get the upgrade capability. Perhaps this document from Cisco about licensing on ISR G2 will help.

http://www.cisco.com/en/US/prod/collateral/routers/ps10536/qa_c67_606268.pdf

HTH

Rick

[sachin.kr]

Sir,

I Have purchase a license for my one router. but i have another one, so i can use the same on other or purchase a new license for other.

Sachin Kumar

[Richard Burts]

You would need to purchase a new license for the other one.

HTH

Rick

[ebarticel]

To enable vpn and other secure options you need to have a key that you need to download and install on the router.

I hope this will provide the answer for you

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6657/prod_qas0900aecd80323cba_ps5854_Products_Q_and_A_Item.html

Eugen