unable to connect web server to cisco 3560x gigabit switch
Unable to connect web server to cisco 3560x switch through patch panel. I connected the sevrer to cisco 2960 fast ethernet switch through patch panel then the port on the switch comes up, but when i connect the same cable to 3560x gigabit port - the port doesnt come up. Help me
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...