Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c3h2s-mz-112.8.2-SA6.bin

Hi Dudes,

I have CISCO 3550 switch, which is having IOS c3500XL-c3h2s-mz-112.8.2-SA6.bin. I tried to enable the " IP Routing" but coudn't. can any one help me.

Thanks,

Tamilvanan.S

5 REPLIES
VIP Super Bronze

Re: Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c

Hi,

Even with SMI image you should be able to run RIP version 1 and 2 and static routes.

What is the error message?

Reza

Hall of Fame Super Blue

Re: Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c

That's a strange IOS version, are you sure you have a 3550 switch and not a 3524xl switch ?

Jon

Hall of Fame Super Silver

Re: Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c

Hello Tamilvanan,

Jon is right: IOS filename leads to a C3500XL that is a L2 only switch and this would explain why it complains of your attempt to turn  ip routing on

Hope to help

Giuseppe

Hall of Fame Super Gold

Re: Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c

Catalyst 3500XL-EN is a layer 2-only switch.  The 3550 "will" support IP routing:  RIPv1, RIPv2 and IS-IS.  If you upgrade to Enhance Multi-layer switch Image (EMI), it will support the rest.  Upgrade of the 3550 is via a hardware (integrated circuit) method only.

Don't forget to rate our posts.  Thanks.

Re: Unable to do ip routing in cisco 3550 switch : IOS c3500XL-c

Hi Dudes,

I have CISCO 3550 switch, which is having IOS c3500XL-c3h2s-mz-112.8.2-SA6.bin. I tried to enable the " IP Routing" but coudn't. can any one help me.

Thanks,

Tamilvanan.S

Hi Tamilvanan,

Check out the realease note for c3500XL-c3h2s-mz-112.8.2-SA6.bin

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/releasesa6/rn/1036901.html#wp17717



Hope to Help !!

Ganesh.H
1184
Views
0
Helpful
5
Replies
CreatePlease to create content