I have also enabled Netflow in IOS 12.1/12.2 and figured the process was similar (It seems to be). CEF is enabled, and I have all the pre-reqs according to the document above, however, the flow commands don't exist, they simply say "command unrecognized". Am I missing some configuration step? I have included my sh version below.
Re: Unable to enable Netflow on Cat 4503-E (Sup7-e)
Yup think you have answered your own question . You will notice it is running a universal image so probably everything is there you just have to buy the license key activation for the feature you are looking for . All the ISR's are now doing this and suspect the rest of the cisco line will follow suit in the future , myself I find it a pain in the you know what ! :-)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.