I have configured the mirror the traffic from int gig0/25 (Gigabit LX port) to gig0/13 (gigabit copper port). Encapsulation type is replicate. The traffic on the source port is 200Mbps but on destination port the traffic zero.
I am not able to under stand the reason of this behaviour. Similar configuration at many other places on the similar switch is working fine.
One observation is that this switch is receiving the traffic from a mirrored port of huawei switch in a ISP environment which I am trying to mirror. On the receiving interface of cisco switch a large packets are shown as GIANTS, RUNTS and input errors. But on Huawei end port there is no such errors. Are there any known issues related to connectivity with Huawei?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...