The above is in redundant design i.e. two 6500 chassis. MSFC has HSRP defined where all the VLANs/SVI are active only on Chassis 1. ACE is in bridged mode and the host is connected to the server lan.
When ACE is active on the primary leg, I am able to ping the SVI on MSFC from the host. However, when I failover the ACE via 'force failover group #' ping to SVI fails. The 'sh ft group brief' shows failover to be successful.
Please advise why would a ping stop working with ACE force failover.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...