Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

unable to Ping switch

Hi Experts

I have a cisco 3560 Switch.

interface 1 & 2 are uplink ports for data and voice vlan respectively

int 3 to 24 are access ports

i have switch ip address on vlan1 which has port 28 in it

How to : ping the ip address of the switch.

Any suggestions

Thanks

AK

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions

Re: unable to Ping switch

Hi Experts

I have a cisco 3560 Switch.

interface 1 & 2 are uplink ports for data and voice vlan respectively

int 3 to 24 are access ports

i have switch ip address on vlan1 which has port 28 in it

How to : ping the ip address of the switch.

Any suggestions

Thanks

AK

Hi AK,

To ping the ip address of the switch you need to have desktop in same vlan that is vlan 1 and as Reza pointed out SVI for vlan 1 should be configured .Then you can ping the switch ip address and as 3560 is l3 switch if ip routing is enabled then other vlan member can also ping the switch ip address.

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

4 REPLIES
VIP Super Bronze

Re: unable to Ping switch

Hi Asif,

If I understand you correctly, you are trying to ping the IP address for VLAN 1.  Do you already have svi configured with ip address?  If yes you can just plug your pc to port 28 and give it an ip address in the same range as the switch  You should be able to ping the IP of the switch now.

HTH

Reza

New Member

Re: unable to Ping switch

Hi

yes switch has an ip address in vlan 1 which i would like to access remotely in this i have to be on the site to connect to it.

Thanks

Asif

Re: unable to Ping switch

Hi

yes switch has an ip address in vlan 1 which i would like to access remotely in this i have to be on the site to connect to it.

Thanks

Asif

Asif,

Is the switch ip is routable in your network, if yes then you can access remotely if not then you need to be onsite to access.

Hope to Help !!

Ganesh.H

Re: unable to Ping switch

Hi Experts

I have a cisco 3560 Switch.

interface 1 & 2 are uplink ports for data and voice vlan respectively

int 3 to 24 are access ports

i have switch ip address on vlan1 which has port 28 in it

How to : ping the ip address of the switch.

Any suggestions

Thanks

AK

Hi AK,

To ping the ip address of the switch you need to have desktop in same vlan that is vlan 1 and as Reza pointed out SVI for vlan 1 should be configured .Then you can ping the switch ip address and as 3560 is l3 switch if ip routing is enabled then other vlan member can also ping the switch ip address.

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

1786
Views
0
Helpful
4
Replies