01-05-2009 04:06 AM - edited 03-06-2019 03:14 AM
I have defined the ca key pair and allowed the source network on 'ssh' command with corresponding interface. The aaa authentication for ssh is LOCAL.
I can successfully ssh into the inside interface but not management. Is anything else required to ssh into management interface.
01-05-2009 06:15 AM
Are you permitting ssh on the management interface?
ssh 10.1.2.75 255.255.255.255 management
01-05-2009 06:52 AM
Yes. I have permitted /24 network and not specific host.
01-05-2009 06:54 AM
Have you tried to debug ssh while trying to connect?
01-05-2009 09:13 AM
debug ssh is blank and does not give any information on ASA.
01-05-2009 09:22 AM
OK, it sounds like your not even hitting the management interface. You can try debugging ICMP trace and try and ping the management interface. If you get no output from the debug, verify connectivity to the management interface.
01-05-2009 09:27 AM
Ping to the management interface is successful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide