I am unable to ssh into ACE module. telnet works. I have defined the management class where telnet and ssh both are allowed and the service policy has been applied to the correct VLAN. All traffic is permitted between the VLAN. Is host key pair required for ssh to work or can it work without it as well.
CAT6500#ssh -l admin -v 1 9.1.1.80
[Connection to 9.1.1.80 closed by foreign host]
CAT6500#ssh -l admin -v 2 9.1.1.80
[Connection to 9.1.1.80 closed by foreign host]
