Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to take telent

Dear Folkz,

I've 2911 router and whenever i trying to take telent of this router , i'm not getting the telnet prompt at all but thru ssh i'm able to login this router.

We've confgured the telent paameters as below.

line vty 0 4

exec-timeout 5 0

privilege level 15

password <removed>

login local

transport input telnet ssh

line vty 5 15

exec-timeout 5 0

password <removed>

login

transport input telnet ssh

This router is running in  c2900-universalk9-mz.SPA.152-3.T.bin.

Running Config has attached FYR

Plz help me out from this issue.

3 REPLIES
VIP Super Bronze

Unable to take telent

Hi,

Try this:

username test password test123

username test privi 15

line vty 0 4

exec-timeout 5 0

login local

transport input telnet ssh

line vty 5 15

exec-timeout 5 0

  login local

transport input telnet ssh

Now, try to login with username test and the password for it.

HTH

Hall of Fame Super Silver

Unable to take telent

I do not see anything in the config that is posted that would explain these symptoms. So I have a few questions.

- where are you telnetting from (what is the source address)?

- is the connection from your machine to the router on the same subnet or do you go through some other network devices? Perhaps the output of traceroute from your machine to the router would be helpful?

- which address on the router are you attempting to telnet to?

- is it possible that some security policy in the network or on your machine is denying the telnet?

HTH

Rick

New Member

Unable to take telent

Dear Richard Burts,

Thxz for your response

1)The source is in different network .(Differnt subnet)

2)I'm trying to telnet the ip  address which is assigned on the physical port (WAN ip)

3)There is no security policy as of now on the machine (Desktop) as i'm able to take telnet of some other routers & switches.

4)Still i'm able to take ssh of the same router and when i'm trying for telnet, not getting the telnet prompt at all.

What could be the reason ??

184
Views
0
Helpful
3
Replies