Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

unable to upgrade Catalyst 3750 in 122-25-SEE2

examining image...

%Tar checksum error in

With the ipbase or ipservices version of the 12.2.25SEE2 I have the same error message:

tftp://10.194.1.1/c3750-ipbase-tar.122-25.SEE2.tar

%Error opening flash:update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

  • LAN Switching and Routing
3 REPLIES
Cisco Employee

Re: unable to upgrade Catalyst 3750 in 122-25-SEE2

Patrick,

Couple of quick checks should help you:

1. Ping the TFTP Server and make sure that you have IP Connectivity.

2. If there is firewall between the switch and TFTP Server, make sure that relevant ports are open on the firewall.

3. Is the .tar file in the TFTP server's root directory.

4. Does the file size that you downloaded match the size stated on Cisco.

5. Could you try using a different TFTP Server.

Let me know if it helps.

Regards,

Arul

New Member

Re: unable to upgrade Catalyst 3750 in 122-25-SEE2

Thanks for your respond.

In fact I can upgrade the catalyst 3750 with old version like 12.2.25SED1 but I have this problem only with many versions in 12.2.25SEE2

Best Regards

Silver

Re: unable to upgrade Catalyst 3750 in 122-25-SEE2

You can't copy a tar zipped archive to flash. Aside from the obove mentioned, you need to do the following;

display the contents of the tar (i.e. is the archive valid)

archive tar /table tftp://10.194.1.1/c3750-ipbase-tar.122-25.SEE2.tar

unpack the tar to flash and keep the previous software for roll-back

archive download-sw /leave-old-sw /reload tftp://10.194.1.1/c3750-ipbase-tar.122-25.SEE2.tar

HTH

--Leon

* Please rate ALL posts.

312
Views
0
Helpful
3
Replies
This widget could not be displayed.