Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Unexpected exception to CPUvector 700, PC = 0

Hi,

Appreciation can help me with this problem. Switch data:

     Cat3750 24TS, IOS c3750-advipservicesk9-mz.122-25.SEB4.

The SW was operating normally then started throwing errors on console and faded.

Then lit the sw to check followed with the problem, the sw decompresses the IOS, but again shows the same message continuously.

Error Messages:

Unexpected exception to CPUvector 700, PC = 0      

-Traceback=

What problem indicates this message?

Everyone's tags (6)
1 REPLY

Re: Unexpected exception to CPUvector 700, PC = 0

Interesting release note on this error that may help, regarding ;

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_20_se1/release/notes/OL633801.html

recovery may be done via the following link;

http://www.cisco.com//en/US/docs/switches/lan/catalyst3750/software/release/12.2_20_se/configuration/guide/swtrbl.html#wp1099467

otherwise sounds like a phone call to Technical Assistance Center (TAC)

regards and good luck Dave

5488
Views
0
Helpful
1
Replies
CreatePlease to create content