Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unicast Storm Traps

I am trying to determine if the unicast storms I am getting syslogs on are legit. I want to have snmp traps sent to me at the beginning and the end of the storm to determine if this is just a temporary spike in traffic. I can't seen to get the traps working. This is on a Cat 3750 running 12.2(25)SEB4 code. This is what I have in my config.

logging trap debugging

logging facility local3

logging x.x.x.x

snmp-server community public RO

snmp-server community private RW

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps storm-control trap-rate 10

snmp-server enable traps stp

root-inconsistency loop-inconsistency

snmp-server host x.x.x.x public storm-control

1 REPLY
Silver

Re: Unicast Storm Traps

Use the following commands for port based traffic control.

1.interface interface-id

2.storm-control {broadcast | multicast | unicast} level {level [level-low] | bps bps [bps-low] | pps pps [pps-low]}

3.storm-control action {shutdown | trap}

233
Views
0
Helpful
1
Replies