Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unknown log message???

Anyone  have any idea what this message means or relates to?

000017: *Nov  8 01:23:23.467: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "Init", ipl= 3, pid= 3,  -Traceback= 0x606A0ED4z 0x62DBF238z 0x622C3AACz 0x62770D64z 0x62786AC8z

000018: *Nov  8 01:23:23.467: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "Init", ipl= 3, pid= 3,  -Traceback= 0x606A0ED4z 0x62DBF238z 0x622C3AACz 0x62786E40z 0x6278896Cz 0x62771B28z 0x6277F3DCz 0x62761454z 0x6288364Cz 0x627C7EB8z 0x627C3314z 0x627C34DCz 0x627C4D58z 0x628D29E8z 0x6282720Cz 0x62827378z

000017: *Nov  8 01:23:23.467: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "Init", ipl= 3, pid= 3,  -Traceback= 0x606A0ED4z 0x62DBF238z 0x622C3AACz 0x62770D64z 0x62786AC8z

000018: *Nov  8 01:23:23.467: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "Init", ipl= 3, pid= 3,  -Traceback= 0x606A0ED4z 0x62DBF238z 0x622C3AACz 0x62786E40z 0x6278896Cz 0x62771B28z 0x6277F3DCz 0x62761454z 0x6288364Cz 0x627C7EB8z 0x627C3314z 0x627C34DCz 0x627C4D58z 0x628D29E8z 0x6282720Cz 0x62827378z

Thank you,

3 REPLIES
VIP Purple

Re: Unknown log message???

Hi,

1.  %SYS-2-INTSCHED:   '[chars]' at level [dec]

An internal software error has occurred.

Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

Related documents- No specific documents apply to this error message.

You need to perform an IOS upgrade.

Its looks like an IOS bug to me. I am not sure about a workaround for this, but if you keep getting this message continously , you should consider opening  a case with Cisco TAC.

Usually if the error indicated by a traceback does not cause a reboot it’s just a bug in IOS.

which platform and release have you got ?

Regards

Please rate if it helps.

New Member

Unknown log message???

Thank you for the reply.  It is a 2801. I don't currently have a Cisco contract but we have three 28xx routers so maybe I can get a slightly newer code of the other router. Thoughts?

sh ver
Cisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 16:00 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

MPHOUCME01 uptime is 14 hours, 56 minutes
System returned to ROM by reload at 21:55:00 CST Thu Nov 14 2013
System restarted at 21:56:35 CST Thu Nov 14 2013
System image file is "flash:c2801-advipservicesk9-mz.124-24.T1.bin"

VIP Purple

Unknown log message???

Hi

Thank you for the reply.  It is a 2801. I don't currently have a Cisco contract but we have three 28xx routers so maybe I can get a slightly newer code of the other router. Thoughts?

sh ver
Cisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 16:00 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

MPHOUCME01 uptime is 14 hours, 56 minutes
System returned to ROM by reload at 21:55:00 CST Thu Nov 14 2013
System restarted at 21:56:35 CST Thu Nov 14 2013
System image file is "flash:c2801-advipservicesk9-mz.124-24.T1.bin"

You have very old IOS , please Upgrade the IOS.

That will remove this bug.

If still this issue pursue with newer code then u need to raise a TAC case.

Regards

Please rate helpful posts.

204
Views
3
Helpful
3
Replies
CreatePlease to create content