Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

|--

good day, I have a problem catalyst 3560 since he himself after several days, it sends a message to me of which it has low memory, does not allow me to access VTY way and no Console way, after some hour does not respond echo to me ICMP and by ultimi it lets comutar and the communication is affected,

this problem is due to I deal corupt in my network? or it is a problem of makes of these equipment?

1 REPLY
Bronze

Re: |--

I would recommend you plug into the console of the 3560 and if it is not responding, reboot and watch the console as it boots and try to login immediately when it comes up.

Also, if you are getting messages of "low memory" I assume snmp traps or syslog is setup. Are there any other messages?

98
Views
0
Helpful
1
Replies