Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Updating IOS on older switches

Hello, I've got several 2950T switches that were installed in 2004. I cannot access them via Network Assistant or a web interface, only using Hyperterminal or telnet. How would I go about updating the IOS on these switches?

THanks.

Jim.

2 REPLIES
New Member

Re: Updating IOS on older switches

Cisco have several documented processes by which the switch IOS can be upgraded via command line and TFTP. Generally speaking, this is the preferred method of upgrading the switches.

IIRC, the upgrade process is detailed in the release notes for each release of code for the various devices. Or if not, there is usally a reference pointer to that information. Thus, have a look at the release notes, they should point you in the proper direction.

...Ron #4526

Edit: In case your search-fu is weak like mine... :)

http://www.cisco.com/en/US/products/hw/switches/ps628/prod_release_note09186a00807984b3.html#wp999371

New Member

Re: Updating IOS on older switches

Hi Jim,

The link below gives the step-by-step procedure on Upgrading Software Images on Catalyst 2950 and 2955 Series Switches using the Command Line Interface:-

http://www.cisco.com/warp/public/473/191.html

Here is another link on upgrading IOS on the 2950 switch, So now you have options :-)

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea7/ol8122.htm#wp37360

Hope this helps!

Best Regards,

Sunny.

514
Views
5
Helpful
2
Replies