cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1557
Views
0
Helpful
2
Replies

Upgrade 2960S IOS

anitachoi3
Level 1
Level 1

Dear Expert,

Is it possible to upgrade the IOS of WS-C2960S-48TS-S (LAN Lite Entry Layer 2)  to LAN base Layer 2?

The IOS is retrieved from "WS-C2960S-48TS-L (LAN Base Layer 2)"

I understand that some services and features may not be activated properly, such know the possibility. Thank you

rdgs

1 Accepted Solution

Accepted Solutions

Dipesh Patel
Level 2
Level 2

Dear Anitachoi,

It is not possible to upgread IOS from LAN Lite to LAN base as both are different Hardwere platform.

Please reffer the link on Cisco site:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/prod_qas0900aecd80322c37.html

Hope this will help you.

Please do not forgot to rate the post if it will helpful to you.

Regards,

View solution in original post

2 Replies 2

Dipesh Patel
Level 2
Level 2

Dear Anitachoi,

It is not possible to upgread IOS from LAN Lite to LAN base as both are different Hardwere platform.

Please reffer the link on Cisco site:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/prod_qas0900aecd80322c37.html

Hope this will help you.

Please do not forgot to rate the post if it will helpful to you.

Regards,

Leo Laohoo
Hall of Fame
Hall of Fame

No.  It's not possible due to hardware limitation.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card