Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

upgrade fwsm from 3.1(10) to 4.1(8)

Hi,

I would like to upgrade fwsm from 3.1(10) to 4.1(8).

FWSM is install on 6509 and I just upgrade it to s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH8b.

1. Can i upgrade fwsm directly form 3.1(10) to 4.1(8). Or i need to upgrade to 3.2(23) ?

2. How and what to backup (image)?

ok, i backup running config

3. upgrading procedure? I download image to tftp

so i just need to hit this?

copy tftp://10.1.200.11/asdm-622f.bin flash:asdm
copy tftp://10.1.200.11/c6svc-fwm-k9.4-1-8.bin flash:
 

and then reload? that's it?

additional information what did I try to do :-)

when i try to backup current image:

Firewall# dir

Directory of disk:/

8      -rw-  1882        12:39:46 Apr 21 2010  old_running.cfg

9      -rw-  1801        12:39:48 Apr 21 2010  admin.cfg

59748352 bytes total (59729920 bytes free)

Firewall# dir flas

Firewall# dir flash:

Directory of flash:/

2      -rw-  3963300     <no date>        asdm

1      -rw-  5898296     <no date>        image

3      -rw-  27076       <no date>        startup-config

No space information available

Firewall# copy flash:asdm tftp:

Source filename [asdm]?

Address or name of remote host [10.1.200.11]?

Destination filename [fwsm-running-confg]? asdm

Writing file tftp://10.1.200.11/asdm;int=inside...

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

3963300 bytes copied in 9.590 secs (440366 bytes/sec)

Firewall# copy flash:image tftp:

Source filename [image]?

Address or name of remote host [10.1.200.11]?

Destination filename [fwsm-running-confg]? image

WARNING: The flash device is in use by another task.

Failed to open image in flash.

%Error writing to tftp://10.1.200.11/image;int=inside ()

Firewall#

Firewall# sh ver

FWSM Firewall Version 3.1(10)

Device Manager Version 5.0(3)F

Compiled on Mon 21-Apr-08 17:43 by fwsmbld

FWSM up 2 hours 43 mins

Hardware:   WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz

Flash STI Flash 8.0.0 @ 0xc321, 20MB

0: Int: Not licensed        : irq 5

1: Int: Not licensed        : irq 7

2: Int: Not licensed        : irq 11

The Running Activation Key is not set, using default settings:

Licensed features for this platform:

Maximum Interfaces          : 256      

Inside Hosts                : Unlimited

Failover                    : Active/Active

VPN-DES                     : Enabled  

VPN-3DES-AES                : Enabled  

Cut-through Proxy           : Enabled  

Guards                      : Enabled  

URL Filtering               : Enabled  

Security Contexts           : 2        

GTP/GPRS                    : Disabled 

VPN Peers                   : Unlimited

Serial Number: xxxx

Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000

Configuration has not been modified since last system restart.

THX!

Ivan

1408
Views
0
Helpful
0
Replies
CreatePlease to create content