upgrade stack 3750

[fd_case17]

hi,

I have to upgrade a stack (2 menber ,3750 24ts)

with ios advipsevices , but the ios present is ipservices.

DO i have to upgrade separately each menber ,

because of different types of ios(incompatibility)

or do i upgrade only the master ?

thanx

[zvondovec]

Hi,

Try to follow this:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml

bye

[vvasisth]

ok when it comes to stack upgrade all switches in the stack needs to be on the same IOS or else stack will be broken.

there is a very easy way to upgrade the stack in one go. Make sure you use a ".tar" IOS this is the one with GUI feature in it. Once you have the IOS downloaded on you computer foloow the below given doc to perform an IOS upgrade as there is a diff way to upgrade with .tar file and TRUST ME its the easieast way to do that :-

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080169623.shtml#concept10

Hope this helps.

Varun