Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading 2960s stack (4)

Morning All,

I am currently carrying out upgrades on switches throughout a site at the moment, all going well until i have come accross this particular stack.

I am recieving the following when trying to load an image from a .tar

LRC1_2960S_Stack1#archive download-sw tftp://10.60.2.12/c2960s-universalk9-tar.150-2.SE4.tar          

Loading c2960s-universalk9-tar.150-2.SE4.tar from 10.60.2.12 (via Vlan50): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 19322880 bytes]

Could not buffer tarfile...using multiple downloads

examining image...

Loading c2960s-universalk9-tar.150-2.SE4.tar from 10.60.2.12 (via Vlan50): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

extracting info (110 bytes)

[OK - 19322880 bytes]

Loading c2960s-universalk9-tar.150-2.SE4.tar from 10.60.2.12 (via Vlan50): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!O.!.!.!!!!!!!!

extracting c2960s-universalk9-mz.150-2.SE4/info (635 bytes)!!!!!!!!!!!!!!!!!

extracting info (110 bytes)

[OK - 19322880 bytes]

Stacking Version Number: 1.49

System Type:             0x00000000

  Ios Image File Size:   0x00E26A00

  Total Image File Size: 0x0126DA00

  Minimum Dram required: 0x08000000

  Image Suffix:          universalk9-150-2.SE4

  Image Directory:       c2960s-universalk9-mz.150-2.SE4

  Image Name:            c2960s-universalk9-mz.150-2.SE4.bin

  Image Feature:         IP|LAYER_2|SSH|3DES|MIN_DRAM_MEG=128

Old image for switch 1: unknown

Old image for switch 2: unknown

Old image for switch 3: unknown

Old image for switch 4: unknown

Extracting images from archive into flash...

Loading c2960s-universalk9-tar.150-2.SE4.tar from 10.60.2.12 (via Vlan50): !

c2960s-universalk9-mz.150-2.SE4/ (directory)

extracting c2960s-universalk9-mz.150-2.SE4/c2960s-universalk9-mz.150-2.SE4.bin (14828032 bytes)!!!!!!!!!!!!!!!.!!!!!!!!!!!

- The reason we can see Old image unknown is because i have been running the /overwrite command and the image got as far as removing the old but then hanged on installing the new - i left this overnight.

This is now a new attempt this morning without the /overwrite command and still getting issues.... any ideas would be great.

Cheers,

Alex

Everyone's tags (5)
1 REPLY
New Member

Upgrading 2960s stack (4)

Hi everyone,

Seems that the stack has taken the image this time - i have to wait untill OOH to reload - but i will keep you updated.

Seemed to just not like it the first time and this timee after removing the /overwrite line seems to have done the trick.

Regards,

Alex

320
Views
0
Helpful
1
Replies
CreatePlease login to create content