cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1653
Views
5
Helpful
2
Replies

Upgrading 3750 IOS

Jumbo
Level 1
Level 1

I am attempting to complete upgrading to c3750-ipservicesk9-mz.122-25.SEE2. I have three stacks done, but the last stack errors stating ?There is not enough memory on switch to examine the new software image?. At the top directory, three file exist (vlan.dat, private-config.text, and config.text, and the directory c3750-ipservicesk9-mz.122-25.SEB4 (w/ 7411712 bytes free). Any ideas?

2 Replies 2

Edison Ortiz
Hall of Fame
Hall of Fame

You should delete the directory containing c3750-ipservicesk9-mz.122-25.SEB4 and then you should have enough space in the flash to update the new image.

Just type

rmdir bootflash:c3750-ipservicesk9-mz.122-25.SEB4

_____

Please rate helpful posts.

Thanks

tjblue
Level 1
Level 1

Assuming you are using a tftp server to do the upgrade, you should be able to issue the following command:

archive download-sw /overwrite tftp://xx.xx.xx.xx/c3750-ipservicesk9-mz.122-25.SEE2.tar.

Obviously, xx.xx.xx.xx is your tftp server. By using /overwrite, the image will be downloaded, checked and then the old image will be removed so that the new image can be decompressed and written to flash.

Hope that helps .... Tim

Review Cisco Networking products for a $25 gift card