Is there a procedure to upgrade 3750 FE stacks to 3750 GE without losing the config?
I have a stack of 4 3750's, 1 (Master) is GE, the other 3 are FE switches. I want to replace the FE switches within the stack with gigabit switches. Is there an automated way to do this without manually re-configuring the stack?
I know you can replace "like" switches and the stack will rebuild its self, I was wondering if I can replace a FE switch with a GE switch and have the stack rebuild automatically.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...