1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
2 2 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
3 3 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
4 4 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
8 8 8 Intrusion Detection Mod WS-SVC-IDSM-2 yes ok
9 9 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
My question to cisco pros is what Do I need to upgrade any hardware or firmware on service module listed above ? When I read one of cisco document and found that WiSM is supported only in sup-engine 720? Please advise what will be the requirements to migrate whole things and what is supposed to do if i want to upgrad firmware in line card such as GBIC and RJ ?
Thanks for your response. But My concern over here is if I upgrade SUP-engine to 720 how about other service module such as IDSM2 and GBIC and RJ-45 line cards? Does they works as before considering I upgrade config file.
And How about the line card firmware ? I thought they work with SUP-engine firmware, but I can see the firmware on them as well.
Sorry for to manny questions but hoping to get good suggestion from you before kick starting migration process.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...