Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading a 4506 from a Sup7L-E to a Sup8

Is there a documented procedure to upgrade from a Sup7L-E to a Sup8 on a 4506?  I want to make sure I have everything covered from any power issues to the most efficient way to migrate the config.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Hi,  There is no specific

Hi,

 

 There is no specific documentation for such a procedure, below you can find the installation notes for the SUP-8-E and the configuration guides:


Cisco Catalyst 4500 Series Switches Configuration Guides:

http://www.cisco.com/c/en/us/support/switches/catalyst-4500-series-switches/products-installation-and-configuration-guides-list.html

 

Installation and Configuration Note for the Cisco Catalyst 4500 E-Series Supervisor Engine 8-E:


http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_29676.html

 

Hope this helps.

1 REPLY
Silver

Hi,  There is no specific

Hi,

 

 There is no specific documentation for such a procedure, below you can find the installation notes for the SUP-8-E and the configuration guides:


Cisco Catalyst 4500 Series Switches Configuration Guides:

http://www.cisco.com/c/en/us/support/switches/catalyst-4500-series-switches/products-installation-and-configuration-guides-list.html

 

Installation and Configuration Note for the Cisco Catalyst 4500 E-Series Supervisor Engine 8-E:


http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_29676.html

 

Hope this helps.

36
Views
0
Helpful
1
Replies