01-09-2012 03:00 AM - edited 03-07-2019 04:14 AM
Hi All.
Does anybody know if a new Cisco Catalyst 4500 series supervisor 7L-E model WS-X45-SUP7L-E is backward compatible with a Cisco Catalyst 4500 series chassis model 4507R?
I've checked on Cisco website for that Supervisor and it shows only new chassis models WS-C4507R+E and R-E, but what about old type of chassis? We need to upgrade that Supervisor as it's out of line, but we don't really want to buy a new chassis as well as it's going to be very pricy.
Thanks for your support.
Regards,
Solved! Go to Solution.
01-09-2012 04:52 AM
Hi,
the info is on the same link I posted few minutes ago on another thread.
"This engine is supported on E-series, R-E, and R+E chassis." So you need a E type of chassis. 4507R is not good.
from Release Note for Catalyst 4500 Series Switch, Release IOS-XE 3.2.x SG"
please rate and close question if helpful.
regards,
Riccardo
01-09-2012 04:55 AM
Based the info from Cisco website at http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html#4500, apparently, sup 7LE is not compatibale with 4500 classic chassis.
Sent from Cisco Technical Support iPad App
01-09-2012 08:15 AM
Hi,
to see the link I gave you, you need to be registered on Cisco.com (CCO) site; basic registration allows you to see docs.
About your question, table 3 of 'Release Notes for the Catalyst 4500 Series Switch, Cisco IOS Releases 12.2(54)SG to 12.2(37)SG' gives you the answer
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/release/note/OL_5184.html
Catalyst 4507R supports:
Supports Supervisor Engine 6L-E, Supervisor Engine 6-E,
Supervisor Engine V-10GE, Supervisor Engine V,
Supervisor Engine IV, Supervisor Engine II-Plus-10GE, and
Supervisor Engine II-Plus
Riccardo
01-09-2012 04:52 AM
Hi,
the info is on the same link I posted few minutes ago on another thread.
"This engine is supported on E-series, R-E, and R+E chassis." So you need a E type of chassis. 4507R is not good.
from Release Note for Catalyst 4500 Series Switch, Release IOS-XE 3.2.x SG"
please rate and close question if helpful.
regards,
Riccardo
01-09-2012 04:55 AM
Based the info from Cisco website at http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html#4500, apparently, sup 7LE is not compatibale with 4500 classic chassis.
Sent from Cisco Technical Support iPad App
01-09-2012 07:57 AM
Thanks for your answers lads.
Riccardo, your link doesn't work, says Forbidden File or Application.
Guys, do you know to what model of Catalyst 4500 supervisor should I upgrade then? without changing the Catalyst 4507R chassis?
Existing supervisor is out of line and production, so i suppose we won't get a support and service on that Supervisor.
Will Supervisor Engine 6-E, 6L-E, V-10GE, V, IV, II-Plus-10GE, II-Plus would support 4507R chassis?
Thanks.
Regards
01-09-2012 08:15 AM
Hi,
to see the link I gave you, you need to be registered on Cisco.com (CCO) site; basic registration allows you to see docs.
About your question, table 3 of 'Release Notes for the Catalyst 4500 Series Switch, Cisco IOS Releases 12.2(54)SG to 12.2(37)SG' gives you the answer
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/release/note/OL_5184.html
Catalyst 4507R supports:
Supports Supervisor Engine 6L-E, Supervisor Engine 6-E,
Supervisor Engine V-10GE, Supervisor Engine V,
Supervisor Engine IV, Supervisor Engine II-Plus-10GE, and
Supervisor Engine II-Plus
Riccardo
01-09-2012 09:08 AM
Thanks a lot for your answers, appretiate that.
All the best.
Regards
01-09-2012 10:58 AM
my pleasure.
would you mind flagging the question as answered please?
Riccardo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide