12-18-2006 11:43 PM - edited 03-05-2019 01:23 PM
I need to upgrade a Switch from Standard to enhanced version of IOS. Can somebody help me with a procesure? Do I need only to copy the BIN file to the Switch and remove the old file or is there something else?
12-19-2006 12:16 AM
Hi Friend,
Can you confirm the switch which you are having?
Ankur
12-19-2006 12:18 AM
Hi
You need to load the .bin file onto your switch which is enough to upgrade the ios code.
But do make sure that you are having backup copy of your current ios code as well as your config taken before reloading the switch with new ios code.
If your flash is capable enough of accommodating both the IOS .bin files then upload the new .bin file without deleting the old one and change the boot loader value accordingly.
Bootloader will help you to boot with the required IOS code if you have multiple ios (.bin) files in your device..
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide