09-19-2008 10:55 AM - edited 03-06-2019 01:28 AM
If i am upgrading a switch from a 100 mg to a gig switch, is there anything i need to do besides to load the configs from the regular 100mg switch?
09-19-2008 10:58 AM
There really isn't any difference in the switch besides the port speeds. You shouldn't have to do anything besides copy and paste the config into the new 3750G switch.
HTH,
Mark
09-19-2008 11:05 AM
Thank you Mark!
Dustin
09-19-2008 11:33 AM
You will have to do a search and replace for 'FastEthernet' to 'GigabitEthernet' in the config file though :o)
Andy
09-19-2008 11:40 AM
how can you do that....just open the file up in notepad and do it? or?
09-19-2008 11:44 AM
Sorry I kinda forgot about doing that... In word pad do a replace FastEthernet with GigabitEthernet will change it. Also there is one additional thing I forgot is your SFP ports will change also to Gi1/0/49-52 since all ports on the switch are gigabit.
Mark
P.S. Thanks Andy for pointing that out!
09-19-2008 11:50 AM
Thank you! I really appreciate all your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide