Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Upgrading IOS Image on VSS from SXH3a to SXI3

    Hi;

        Thanks in advance for the help. We are planning on upgrading IOS images on our 6500 VSS boxes from SXH3a to SXI3. Could someone advice me whether there are any problems in doing so and did anyone face any problems while doing so?

Regards;

Rams

3 REPLIES
Silver

Re: Upgrading IOS Image on VSS from SXH3a to SXI3

Here is the link on VSS configuration.  The 

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1169499 

This works like a charm without any problem.

regards,

Varun Vasisth

Rate the post if its helpful.

Re: Upgrading IOS Image on VSS from SXH3a to SXI3

    Hi;

       Thanks in advance for the help. We are planning on upgrading IOS images on our 6500 VSS boxes from SXH3a to SXI3. Could someone advice me whether there are any problems in doing so and did anyone face any problems while doing so?

Regards;

Rams

Hi Rams,

Check out some sample working configuration on VSS also along with upgardation document for future reference:-

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1169328

http://shouldhavegonewithcisco.com/__oneclick_uploads/2009/03/vss-upgrade-steps1.txt

Hope to Help !!

Ganesh.H

New Member

Re: Upgrading IOS Image on VSS from SXH3a to SXI3

I noticed one funny thing after upgrading to SXI3. All access-lists now come before the interface list! On all other IOS platforms and versions the acl has always come after interfaces and routing.

3052
Views
5
Helpful
3
Replies
CreatePlease to create content