Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

upgrading switch 2950 image

i have switch 2950 without image in the flash ..how to download image to the flash using tftp server

1 ACCEPTED SOLUTION

Accepted Solutions

Re: upgrading switch 2950 image

If the switch is in Rommon, you will have to perform Xmodem

If you are still in the switch prompt, you can just copy the new image to flash and set the boot path

http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

HTH, rate if it does

Narayan

1 REPLY

Re: upgrading switch 2950 image

If the switch is in Rommon, you will have to perform Xmodem

If you are still in the switch prompt, you can just copy the new image to flash and set the boot path

http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

HTH, rate if it does

Narayan

177
Views
5
Helpful
1
Replies
CreatePlease to create content