Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Greetings to all,

I have a WS-X6K-SUP2-2GE that is running CatOS and I would like to change it over to IOS. Does anyone have a link or process to do this?

Thanks,

Tom

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Ahhh I posted the wrong link from my bookmarks. Sorry about that, I dont know what I was thinking. This is probably what you were looking for:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

6 REPLIES

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Community Member

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Actually, I found this earlier and its to go from CatOS to IOS... I need it the other way... Is it really as simple as doing these steps in reverse?

thanks,

Tom

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

If I understood your above post correctly, isn't that what you are asking for. From CatOS to IOS? Why would you want to go back to Cat?

Community Member

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Here is the title of your link...

System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches

I need to go FROM CatOS to IOS...

Thanks!

Tom

Community Member

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Nevermind... I found it... There is a link in the doc for CAT to IOS...

Thanks for your help...

Re: Upgrading WS-X6K-SUP2-2GE from CatOS to IOS

Ahhh I posted the wrong link from my bookmarks. Sorry about that, I dont know what I was thinking. This is probably what you were looking for:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

557
Views
0
Helpful
6
Replies
CreatePlease to create content