10-30-2009 08:47 AM - edited 03-06-2019 08:23 AM
Hello,
i am interresting how to upload cisco 2611xm ios with requirements 256/64 Mb flash if the limit of cisco 2611xm is 254/32 Mb
thank you
10-30-2009 09:34 AM
You have enough DRAM but not enough flash space to store the newer IOS . A lot of the newer 12.4 releases are bigger than 32 meg in size thus the requirement for 64 meg of flash. You would need to upgrade flash to a bigger size.
10-30-2009 10:17 AM
Yes, but in documentation 32Mb is the maximum,
10-30-2009 10:24 AM
Sergey,
The maximum for 2611XM is 256/48.
Check these link out:
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd800fa5be.html
http://www.cisco.com/en/US/docs/routers/access/2600/hardware/installation/notes/2600mem.html#wp93135
Edit: I'm not sure why the only IOS below needs 256/64. It might be wrong on the download page or the documents I provided are out of date. (grin)
INT VOICE/VIDEO, IPIP GW, TDMIP GW
c2600-ipvoice_ivs-mz.124-15.T10.bin
Release Date: 16/Sep/2009
Size: 25902.84 KB (26524500 bytes)
Minimum Memory: DRAM:256 MB Flash:64 MB
You will be fine with 256/48 if you are not a fan of IPIP GW. (J/K)
HTH,
Toshi
10-30-2009 11:43 AM
If what you are saying is true then those "T" train images probably should not be under 2611XM . All the 2600XM boxes run the same images and say something like a 2651XM may have enough to run those . My advice would be to run a just the 12.4 mainline image in which case you have enough dram and flash for any image in the mainline train.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide