11-24-2006 02:03 PM - edited 03-05-2019 01:00 PM
Is there any restriction to the number of FastEthernet dot1q sub-interfaces you can configure on a 2600 series router?
Thanks!
Solved! Go to Solution.
11-24-2006 08:15 PM
Hi Steve,
It all depends upon the IDBs (Interface Descriptor Block) on each platform. But in general you will get enough that you can accomodate your requirement easily.
Check this link and it will give you the details or each and every platform
Ankur
*Pls rate all helpfull post
11-24-2006 08:15 PM
Hi Steve,
It all depends upon the IDBs (Interface Descriptor Block) on each platform. But in general you will get enough that you can accomodate your requirement easily.
Check this link and it will give you the details or each and every platform
Ankur
*Pls rate all helpfull post
11-27-2006 06:25 AM
~800? Looks like about 750 more than I will ever need.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide