Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Url filtering on 2691 or 2651 XM routers

Hi all,

I was wondering if i can enable url filtering  on my 2691 or 2651XM  routers so that if someone visits any website i can see that under router logs.

right now i am using kiwi syslog that logs the router activities.

Thanks

MAhesh

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Super Bronze

Url filtering on 2691 or 2651 XM routers

Hi Mahesh,

Have a look at this doc and see if you can apply any of these commands to enable URL filtering.

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftwebsen.html#wp1047635

HTH

Cisco Employee

Url filtering on 2691 or 2651 XM routers

Hi Mahesh,

You can enable urlfilter, but you will need websence or N2H2 servers.

You can find more info on the following links:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_n2h2.html#wp1027129

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftwebsen.html

Please rate helpful posts.

Best regards,

Alex

3 REPLIES
VIP Super Bronze

Url filtering on 2691 or 2651 XM routers

Hi Mahesh,

Have a look at this doc and see if you can apply any of these commands to enable URL filtering.

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftwebsen.html#wp1047635

HTH

Cisco Employee

Url filtering on 2691 or 2651 XM routers

Hi Mahesh,

You can enable urlfilter, but you will need websence or N2H2 servers.

You can find more info on the following links:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_n2h2.html#wp1027129

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftwebsen.html

Please rate helpful posts.

Best regards,

Alex

New Member

Url filtering on 2691 or 2651 XM routers

Hi Reza and Alex

Many thanks for the info you provided.

Regards

Mahesh

224
Views
0
Helpful
3
Replies
CreatePlease to create content