Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

USB Reset Button on Nexus 7700 Supervisor

 

Does anyone know what the USB Reset Button on Nexus 7700 Supervisor is used for? Is it used to unmount the USB stick?

And why are the USB ports named Slot 0 and USB 1. Seems strange. Is there a story behind this?

 

John

 
 
Everyone's tags (1)
1 REPLY
Cisco Employee

---USB Ports enable access to

---USB Ports enable access to USB flash memory devices for software image loading and recovery.


---3 USB ports: 2 host and 1 device port for peripheral devices

Check below link for more info:


http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_replacing.html

Regards,

Naveen

****Rate if it is helpful****

 

138
Views
0
Helpful
1
Replies
CreatePlease to create content