Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Username access

Hi,

I have been told that we need to shutdown all unused ports on all the switches. Since this is a lot of work, I have thought about giving this task to the helpdesk but I am afraid of them making a mistake; therefore, I would like to see if there is anyway of creating a username with certain access only to the interfaces and for them to be able to enable/disable them.

Thank you, Rafael.

3 REPLIES

Re: Username access

What switches/version of IOS do you run? In the later version of switches and IOS you can use the "range" command to configure multiple interfaces at the same time.

HTH>

Re: Username access

Rafael,

You'll want to look at privilege levels and roles. Definitely roles.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: Username access

i go with John, u can create roles, which will work fine

--srini

252
Views
0
Helpful
3
Replies