using a cisco WS-C3550-12G as dhcp server for wireless
I'm using a cisco WS-C3550-12G IOS: Version 12.1(11)EA1 as a dhcp server for our publicwireless.
Every now and then i'm getting an infinite lease that is setup as automtic, eventually this becomes a big headache because I have clients that try to connect to that IP that's IP is set to Infinite and Automatic. This causes problem because I have user's that can't connect because they are trying to use that IP.
Below is an example of client showing infinite on the cat3550:
cat3550#show ip dhcp binding | include Infinite 172.xx.xx.xx 0023.xxxx.xxxx Infinite Automatic
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...