Using Cisco 1142's and having transferring issues and slow connection speeds to the internet..I am also looking to upgrade my switches from 2960's to 2960xr
Thats basically it folks I am interested in know are there any ways of testing for transferring issues( I really dont know what is meant by this but this was what was told is the issue). In addition to the transferring issues users are complaining about very slow wireless connections. I believe they are currently using 2.4Ghz and planning on moving to 5.0 Ghz
Are there any suggestions on how to troubleshoot this issue such as wireless programs or tools to help correct this issue
Also does anyone know anything about what it takes to upgrade a switch from 2960 to a 2960xr and what are some of the benifits to doing this
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...