Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using Microsoft IAS to autheticate Cisco VTY sessions.

Recently configured Microsoft RADIUS to authenticate VTY users for our Cisco devices.The goal was to authenticate using Active directory domain groups. Everthing works great when we specify PAP as authentication method in RAS policy but when we try to authenticate using EAP or other secure methods it does not work. How do we specify aaa authetication to use EAP on switch so this will work?

Thanks in advance.

3 REPLIES
Hall of Fame Super Bronze

Re: Using Microsoft IAS to autheticate Cisco VTY sessions.

New Member

Re: Using Microsoft IAS to autheticate Cisco VTY sessions.

Thanks for the quick response!

When I set authentication to CHAP on Radius server it fails. Is there a command I need to set on the 3560 switch to force CHAP authentication?

New Member

Re: Using Microsoft IAS to autheticate Cisco VTY sessions.

I found this link maybe it'll shed some light on this problem.

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080093f4b.shtml

192
Views
0
Helpful
3
Replies