Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

verify flash: on C3750.. file not found

Why I can't verify IOS bin file saved in a subfolder on the flash!

verify flash:c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin"

%Error verifying flash... (No such file or directory)

9 REPLIES

Re: verify flash: on C3750.. file not found

Hi,

It looks like some typo in the command.

the command should mostly look like

"verify flash:c3750-ipbasek9-mz.122-44.SE2.bin"

Check this out.

-VJ

New Member

Re: verify flash: on C3750.. file not found

I tried already all the combinations!

I also tried it to run on different 3750 switches and I had the same unsuccessfully results. It seems the "verify" is unable to read an image file under a subfolder!

Re: verify flash: on C3750.. file not found

Hi,

Try this..

1) issue the cd command to switch to the directory you want

cd "directoryname:

2) Execute the verify command with the file name.

verify "filename"

Alternatively you can try this alsow

verify flash:/directoryname/filename

Have a note of the slash "/".

In your case it should be as follows

verify flash:/c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin

This should work.

Test this and let us know the result. Both method works for me.

HTH

-VJ

New Member

Re: verify flash: on C3750.. file not found

Hi,

I still don't get verifiy worked on the ones that have been upgraded to c3750-ipbasek9-mz.122-44.SE2.bin

See the attached file!

I have several c3750 and the verify works on the ones running ipbase-mz.122-25.SEE2.

Is it a bug of 122-44-SE2 version?

Thanks

Re: verify flash: on C3750.. file not found

It looks like you are hitting CSCsi66075.

It is *NOT* supported in that build.

Please rate, if it helps.

New Member

Re: verify flash: on C3750.. file not found

Check the IOS bug... if not then verify for us if you have the switch stacked with other 3750s? If so, perform a "dir all" to find if the IOS is only on another switch flash and not the "master" switch stack.

New Member

Re: verify flash: on C3750.. file not found

I have few switches in the stack. The ones I tested are not configured as stack.

I have tried additional test while I'm writing this email and it seems the problem only occurrs with the 3750s running /c3750-ipbasek9-mz.122-44.SE2 as IOS image.

I tried some other which are not yet updated with latest IOS and the verify command works fine!

It must be a bug for that IOS version!

New Member

verify flash: on C3750.. file not found

Hi, I got the same problem, and I try to put extra parameter  /md5

example :

verify /md5 flash:/c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin

and it's work for me.

New Member

verify flash: on C3750.. file not found

Hi, getting the same error message with c3750-ipbasek9-mz.122-53.SE1.bin

Cisco#verify flash:c3750-ipbasek9-mz.122-53.SE1.bin

File system hash verification failed for file flash:c3750-ipbasek9-mz.122-53.SE1.bin(No such file or directory).

After getting MD5 hash value for that IOS (http://www.cisco.com/cisco/software/cart.html?mdfid=&treeMdfId=268438038&flowid=null&addoption=DN&imageGuId=717943AADCA8210CC4125BFAF81514BC75E2C617&isLatestRel=)

I can now succesfully proceed with

Cisco#verify /md5 flash:c3750-ipbasek9-mz.122-53.SE1.bin 7fd986e52367ca1153d6103edf8bd4ed

..................................................................................................................................

...................................................................................................................................

..................................................................................................................................

................................................................................Done!

Verified (flash:c3750-ipbasek9-mz.122-53.SE1.bin) = 7fd986e52367ca1153d6103edf8bd4ed

That's all

4102
Views
10
Helpful
9
Replies
CreatePlease to create content