My main requirement is about having counters so see how many packets for each CoS/DSCP type each interface is sending and/or receiving.
Additionally, how many of these are sent to each one of the queues (how many to the high priority queue and how many to the others).
The command I found (show queueing interf gig x/y)
includes counters for packets being discarded. This is nice but gives you information only when congestion happens. During normal operation it is all zeros.
Smaller switches like the 3750 or 3560 include the following command: "show mls qos interface x/y stat". Gives me the counters I want. Nevertheless, does not exist in the 6500s.
In a summary, I want to have no concerns about VoIP traffic not using the high priority queues. I also want to make sure we don't have any rogue packets using the high priority queues. Get the idea? Any other commands you may know to verify this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...