10-19-2009 02:03 PM - edited 03-06-2019 08:11 AM
Hey all,
I'm a CCNA without any real world experience. I'm trying to find a WIC for a 2801 that has at least one gigabit interface (fibre). I've been digging around for half an hour online, and most of what I find is HWICs, which it looks like the 2801 doesn't support. What do I need?
Thanks in advance. ;)
10-19-2009 02:11 PM
10-19-2009 02:41 PM
That one specifically says "except the 2801". :(
10-19-2009 03:11 PM
I did read your post too fast.
There is no HWIC for the fiber for 2801.
You need to upgrade the router for that feature.
10-19-2009 08:54 PM
Hi Anthony,
The links which Lucien has sent states that this GE HWIC is supported on a 2801 router with IOS 12.4(15)T9, IP Base, Table 2.
As far as HWIC slot on 2801 is concerned you get -
2 slots which support HWIC, WIC, VIC, or VWIC
1 slot which supports WIC, VIC, or VWIC 1 slot which supports VIC or VWIC
So to me it looks like HWIC-1GE-SFP is supporte on 2801 router.
-> Sushil
10-21-2009 05:35 AM
Correct, the HWIC-1GE-SFP is supported with 12.4(15)T9 or newer. But as Guiseppe writes, you shall not expect to have a full 1GE throughput.
HTH
10-20-2009 01:37 AM
Hello Anthony,
be aware that a GE port on a C2801 would be just nominal : router performance are far lower then a GE port.
It could just solve an interconnection issue.
Have you got a free FE port on the device?
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: