I currently have a vg224 that has a paging system devise that connects to port 21. We consistenly have issues with that paging system. I am thinking that their is a bug or something on the vg. Can someone let me know of any bug that would cause the paging system to hang or release a fast busy.
I am thinking to upgrade the vg. Can someone let me know what is the latest Ios I should upgrade my VG too. Here are my current specs.
You can upgrade to 12.4(11)T or 12.4(9)T3 .12.4(11)T introduces a number of changes in QoS (CCE = Common Classification Engine).If you don't need 12.4(11)T features, then 12.4(9)T3 is a good bet. Elsewise go with 12.4(11)T1.
Also you can check the IOS upgrade palnner which is available in Cisco.com
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...