Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Viewing Debugging when Telneting to a Cisco Router

Hi,

I ran the a debug on a Cisco router through Telnet and I entered the command "show terminal" which should, I believe, show me the output of the debug remotely but I am still not able to see it.

Can you please help me in this?

Thanks,

Haitham

2 REPLIES
Cisco Employee

Re: Viewing Debugging when Telneting to a Cisco Router

Hi Haitham,

You need to enable "terminal monitor" to see the debugs when you have access the router through telnet.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tcf_r/cf_12ht.htm#wp1037494

HTH

Ankur

*Pls rate helpfull post

New Member

Re: Viewing Debugging when Telneting to a Cisco Router

Dear haitham

You can check this

no logging console in configuration mode

sh log on exec mode

Regards

Ajay

243
Views
5
Helpful
2
Replies